Since the beginning of 2018, many Rolex Daytona replica watches have been released in the market. The two main factories responsible for manufacturing these replicas are AR and Noob. Both factories produce high-quality replicas, but there are significant differences between Noob Daytona and AR Daytona. In my opinion, Noob produces the best replica Rolexes, including the Daytona models. Some people may not agree, but this is my belief. Noob not only uses 904L stainless steel for the case but also incorporates the super clone 4130 movement, which features a fully functional chronograph. AR also has their own clone 4130 movement, but it lacks a real chronograph, which is a bit disappointing. Today, I would like to introduce another excellent replica Daytona made by Noob factory. This particular model is based on the reference number 116515, and it is the top Daytona replica available in the market. There are no other Daytona watches that can compare to this one.

The AR factory has made the most significant change to the Daytona in its movement. They have replaced the movement with a super clone 4130 that features an original KIF shock absorber. The movement plates have been meticulously crafted to replicate the original design, with chamfering and sun-ray polishing. The overall appearance of the movement is identical to the genuine Rolex 4130 Caliber. Unlike the previous Asian Valjoux 7750 movement, this super clone 4130 has the correct thickness and is not as bulky as the Asian 7750. When examining the movement photos below, it is evident that the polishing and engravings are accurate. Thanks to the original KIF shock absorber, the clone 4130 movement offers excellent stability and accuracy.

The case of the watch is constructed from 316L stainless steel and has a diameter of 40mm. It features a durable and thick coating of 18K rose gold, which has been measured to be 5 mils thick. The case itself has a brushed finish, while the four lugs and case side have a polished appearance. The lugs have been designed with a curved line to ensure a comfortable fit on the wrist. You can rest assured that the rose gold tone will not fade easily due to the thickness of the coating. In the future, if you notice any changes in the rose gold plating, you can send the watch to our factory for a fresh coat. The bezel is made from genuine black ceramic and is adorned with rose gold markings. The back of the watch features a solid case back with a brushed center and a polished round edge. On the back of each lug, you will find engraved symbols, although I am not familiar with their meaning.

The dial of the watch features Swiss lume applied on the hour markers and hands, which results in a strong blue lume effect in the dark. The sunray rose gold dial has a premium texture that adds to its overall quality. The replica watch also includes three functional subdials: the small seconds subdial is positioned at 6 o’clock, the small dial at 3 o’clock is for the 30-minute chronograph, and the small subdial at 9 o’clock is for the 12-hour chronograph. Each of these subdials is designed to work accurately. Additionally, the subdials have a rose gold edge with black circles at the center, adding to their visual appeal.

The replica Rolex Daytona watch features a black leather band crafted from genuine alligator leather. The strap is adorned with a rose gold buckle, which showcases a delicate Rolex Crown. The clasp of the watch unveils flawless engravings that are meticulously done by the manufacturer. Additionally, this timepiece boasts a water resistance depth of 50 meters.

The numerous new watches have made their debut in the market. Notably, Noob introduced the highly anticipated Super Clone 4130 Daytona V3 edition and the GMT-Master II 126710 Blue/Red. Additionally, OM factory showcased an impressive range of Audemars Piguet Royal Oak watches, while VS factory impressed with their stunning Omega Seamaster collection. However, among all these new releases, the replica GMT-Master II crafted by Noob factory stands out as the most captivating and alluring timepiece.

The Noob factory introduced only one replica Rolex GMT-Master II model – the Blue/Black 116710BLNR. Notably, this was the only GMT-Master II watch from Noob crafted using 904L stainless steel. Subsequently, Noob shifted their focus to Daytona watches, and in September, they released upgraded V3 editions of the Daytona collection with 904L stainless steel and Super Clone 4130 movement. It’s widely acknowledged that Noob currently produces the best replica Daytona watches in the market.However, in terms of researching and developing other Rolex models, especially the GMT-Master II, Noob has lagged behind other factories such as GMF. Nonetheless, the recent release of the 126710 Blue/Red GMT Master II by Noob has helped them regain some credibility in the industry.

Over the past few years, the replica Rolex GMT-Master Batman 116710BLNR has consistently held its status as the most sought-after GMT watch. The numerous new models of the Rolex GMT-Master II were introduced, leading to a surge in demand. While many factories began producing GMT-Master II replicas, none could match Noob’s ability to create them with both 904L stainless steel and the same movement found in authentic Rolex watches. Consequently, even though there might be a waiting period for orders from Noob, the exceptional quality and accuracy make it worthwhile to exercise patience.

Returning to the review of the GMT-Master II, similar to other Rolex GMT-Master II models, this timepiece boasts a case diameter of 40mm and a case thickness of 12.5mm. Crafted from premium 904L stainless steel, both the case and jubilee bracelet exude exceptional quality. The bezel is made of high-quality ceramic material and features a captivating blue/red color combination, with the red appearing more akin to a rich brown hue. Moreover, the bezel markers are coated with platinum, ensuring their longevity and preventing any fading. As for the movement, Noob has incorporated a clone 3285 into this replica Rolex GMT-Master II. Notably, this marks the first appearance of the 3285 movement in our market that accurately replicates the hand stack and offers an adjustable hour hand. The functionality of the movement is indistinguishable from that of a genuine Rolex 3285.

Without a doubt, Noob’s Rolex offerings are of exceptional quality, with certain models setting the benchmark for watch-making in the market. One such example is the black Submariner 116610LN, which has achieved legendary status. As for this replica GMT-Master, if you prioritize perfection in terms of case design, dial details and movement function, Noob should be your go-to choice. That being said, it’s worth noting that the replica GMT-Master watches equipped with Super Clone movements from Noob have proven to be somewhat less stable. Many of my clients who previously purchased Noob GMT-Master watches have reported issues with their timepieces. It’s worth highlighting that Noob has yet to develop a movement for the GMT-Master that offers the same level of stability as the Super Clone 4130 used in their Daytona products.

At present, the most popular Rolex replica watches are undoubtedly the Datejust models. The advantage of choosing Datejust is that you don’t have to wait for a long time before your order is shipped out. Both GM factory and EW factory can promptly deliver your chosen Datejust as they maintain a large stock of these watches. GM, in particular, is known for offering the best quality at the moment. However, it’s worth noting that some other factories that used to produce even better Datejust replicas than GM are currently facing certain situations. Noob factory is closed, AR factory is on holiday, and VS factory is also on holiday. As a result, only GM factory can still provide high-quality Datejust replica watches.Regarding EW factory, their focus is not on producing top-quality Rolex replicas. Nevertheless, their Datejust watches have the advantage of being reasonably priced while maintaining a moderate level of quality. If you search for Rolex watches on the internet, you will likely come across replicas from EW factory.

This two-tone Datejust is manufactured by the EW factory, combining yellow gold with stainless steel. This combination appeals to me, and the 36mm case diameter makes it suitable for both men and women. The two-tone color scheme is particularly attractive to women. The fluted bezel in yellow gold perfectly complements the yellow gold middle links of the jubilee bracelet.

Indeed, EW factory offers this replica watch at an incredibly affordable price, which is less than 400 USD. It’s challenging to find a high-quality replica Rolex at such a low price from other factories. Currently, a replica Rolex made with 904L stainless steel and featuring a clone 3235 movement would typically be priced over 400 USD. However, EW factory provides the opportunity to purchase it at a much more cost-effective price, resulting in significant savings.

EW factory has become a significant competitor of BP factory at this price level. Despite BP’s long-standing history of over ten years in the industry, most people are still more inclined to opt for a Datejust from EW. Both factories offer a rich collection of Rolex watches and maintain an adequate stock of models. However, at the same price point, EW factory installs a clone Rolex movement in their replica watches, such as the clone 3235 movement inside this Datejust. This feature is appealing to most buyers as they prefer a clone Rolex movement in their replica watch rather than a clone ETA 2824 movement. The clone 3235 movement looks better and closer to genuine in outlook, at least to the naked eye.

Indeed, it seems that EW factory has seized the opportunity and successfully captured a significant portion of the Rolex replica market share that was previously dominated by BP. This shift in market dynamics indicates that the landscape is undergoing significant changes. As consumers’ preferences evolve and new options become available, it’s natural for market shares to fluctuate. It will be interesting to observe how this competition between EW and BP continues to unfold in the future.

Regarding the latest Rolex Air King model released in 2022, there are only a few watch factories in the market currently replicating this timepiece. Among them, JVS is the sole manufacturer of this particular watch’s replica. It’s important to note that JVS is an independent entity and has no affiliation with the VS factory. While there have been speculations suggesting a link between the two, these claims are unfounded. Some unscrupulous dealers have even gone as far as marketing JVS watches under the name of VS, so caution is advised. While the quality of JVS’s replica watches may be commendable, resorting to deceptive practices for sales is unnecessary and does a disservice to customers.

JVS factory has gained a reputation for producing high-quality replica watches, particularly for popular brands like Rolex and Omega. It’s worth noting that JVS often takes the lead in manufacturing replicas when new Rolex or Omega models are released, consistently demonstrating their ability to swiftly bring these replicas to the market ahead of other factories. The current Air King replica from JVS is widely regarded as the best version available, mainly due to the exclusivity of JVS being the sole manufacturer producing this particular replica. Undoubtedly, JVS has put great effort into ensuring the quality of their replicas, evident in the impeccable finishing and accurate clone movements. Notably, the new Air King model with reference number 126900 showcases distinct features such as the crown logo positioned at 6 o’clock and the addition of shoulders to the crown, setting it apart from its predecessors.

The quality of JVS factory’s new Air King 126900 replica is generally considered good, but some may argue that it falls short of being a super clone despite its high selling price. While JVS claims to use 904L stainless steel for the case and bracelet, it’s difficult to verify this without testing the material. Typically, big factories like VS and Clean are known to use 904L stainless steel for their replica Rolex watches. However, it’s important to note that replicas cannot be fully tested for their stainless steel material. Overall, the case finish on the new Air King is well-done, with the added protection of shoulders around the crown. The case thickness is also similar to that of the genuine model, measuring at around 13mm. Many have inquired about a quality replica of the new Air King 126900, and JVS factory has made it available.

The black dial of the new Air King 126900 replica by JVS factory presents an appealing aesthetic, with prominent markers including larger 3, 6, and 9 hour markers. The addition of a green second hand adds to its visual appeal. Positioned below the large triangular 12:00 hour marker, you’ll find a yellow crown logo and “ROLEX” in green—a design choice that enhances the charm of the Air King. In terms of movement, JVS factory utilizes a clone 3230 automatic movement. While it may not be classified as a super clone or an in-house clone, it’s important to note that this clone 3230 movement differs slightly from the genuine Rolex 3230, unlike the super clone 4130. Nevertheless, upon external inspection, the decoration of this clone 3230 movement appears impressive.

If you really want this watch, now you can buy from JVS factory. But there certainly will be a better version in future, I am not sure whether VS will make it or not, but VS definitely won’t replicate it in 2022 or even in the first half of 2023. It seems like GM will probably become the second factory to make this replica watch, and also EW factory. Well, I do not think they will be as good as this one made by JVS.

The Sea-Dweller 126600 is not a recent addition to Rolex’s lineup, having been introduced several years ago. Upon its release, this timepiece garnered significant attention from buyers due to its 43mm size, which filled a niche between the 40mm Submariner and the 44mm DEEPSEA Sea-Dweller. However, the recent launch of the 41mm Submariner has led to a decline in the popularity of the 43mm Sea-Dweller 126600. This is understandable, considering that the Sea-Dweller is designed as a professional diving watch and may be considered somewhat thick for many individuals. As a result, the 41mm Submariner has now gained greater popularity.

Within the replica watch industry, the development trajectory of the replica Sea-Dweller 126600 closely mirrors that of its authentic counterpart. Approximately four years ago, AR was the pioneering factory to produce the replica 126600. The initial release of this replica watch generated considerable popularity, attributable to AR’s meticulous attention to the case and bracelet finishing. As a result, the replica 126600 from AR became one of the best-selling Rolex replicas at that time. In subsequent years, leading up to its closure, AR factory continued to enhance the replica 126600, ultimately reaching the V4 edition.In addition to AR, other watch factories such as Noob and GM also manufactured the 126600 during that period. Recently, VS announced their entry into the market with their own version of the replica 126600. Following the closures of AR and Noob, only two watch factories remain capable of providing super clone 126600 in the current market: GM and VS.

GM factory offers two movement options, the 2836 and 3235, for the replica Sea-Dweller 126600. On the other hand, VS factory currently only equips this watch with the 3235 movement. While both options are worth considering, I personally prefer the version from VS factory due to its superior 3235 movement.VS factory initially introduced the 3235 movement in their Datejust 2 and conducted extensive testing over nearly a year, which instills confidence in its quality. Currently, there are two clone 3235 movements available from different factories: VS and Clean. Both factories claim to produce the best 3235 movement in the market, but it is difficult to determine which one is truly superior as no customer complaints have been reported for either option.Regarding the 3235 movement used in the Sea-Dweller 126600 from VS factory, it is claimed to have a power reserve of up to 72 hours. While I cannot confirm if this assertion is accurate, as no customers have specifically mentioned it, I believe it likely offers a longer power reserve compared to the 3235 movement from Clean and GM.

I agree, the 3235 movement is a significant advantage for the replica Sea-Dweller 126600 and a major selling point. When a watch factory has a unique advantage that its competitors do not have, it is likely to attract more customers and sell well in the market.In terms of the bezel, the ceramic uni-directional rotating bezel is another notable feature of this replica watch. VS factory uses stamping technology to fix the ceramic insert into the groove, which is closer to the genuine watch than the bezel insert fixing method used by GM or Clean, which involves glue. The triangle marker on the bezel has a lume pear, and it can be set back in a correct position aligned with the crown logo on the inner bezel and the 12:00 hour marker on the dial. Additionally, when pressing down on the bezel with your fingers, there is a flexible spacing between the bezel and the middle case, but this is normal and does not affect water resistance, as the genuine watch’s bezel demonstrates a similar characteristic.

The VS 126600 may be slightly higher compared to the GM 126600, but it is still a worthwhile investment for those who truly appreciate this diving-style watch. I also agree that all Rolex replica watches from VS factory offer reasonable prices and high-quality craftsmanship.Regarding the Daytona, I’m not sure if VS factory plans to produce it in the future, but I can understand why you would want them to do so. I know that Clean sells the Daytona at high prices, which may make it less accessible to some customers.

Today, I would like to introduce you to a fantastic watch from BB factory, the big Hublot Unico replica watch. Previously, BB factory released several models of this Hublot Unico under the name ZF and sold them. However, in the promotion of this sky blue Hublot replica watch, I did not find the ZF name. Perhaps customers have recognized the quality of the Hublot Unico replica watches from BB factory, allowing them to be sold independently without the help of ZF’s promotion. This ceramic Hublot Unico replica watch has previously been released in five models, including red, yellow, white, blue, and black. The new model I’m going to show you is a new color, which is sky blue, and it looks amazing.

BB factory sells the replica at a high price due to its sky blue ceramic case. The case measures 44mm in diameter and 17mm in thickness, making it a large and thick watch. It is challenging for the case thickness to be reduced while maintaining the Asia Valjoux 7750 movement in the replica watch. The case construction is sandwiched, which poses difficulty for the factory as the genuine watch must have good water resistance with such a case. However, I do not recommend wearing the replica watch while swimming. Since the genuine watch is very expensive, there is no need to worry about the replica having the same construction. Not many people own the genuine watch, and even fewer have seen it, so wearing the replica in public is unlikely to raise suspicion.

Under the protection of the sapphire crystal, the watch features a skeleton dial that allows you to view the intricate machine parts of the movement. The small dial at 3 o’clock also has a sky blue background, perfectly matching the case color. However, for those seeking a super clone with a flawless dial identical to the genuine watch, this replica may not meet their expectations. Despite being a super clone, the differences in the dial are noticeable when compared to a genuine piece in a boutique.The skeletonized dial construction does not compromise the wearer’s ability to read the time, as the hours, minutes, and small seconds (at 9 o’clock) can still be easily discerned. Additionally, the sky blue subdial at 3 o’clock serves a practical function as a 60-minute chrono counter. While the replica boasts a working chronograph function, it is advisable to refrain from operating the chrono buttons too frequently.

The movement visible through the crystal back is a Chinese chronograph movement, featuring a decorated auto rotor and a plate with Hublot decorations on top of the base movement. The addition of the movement plate increases the overall thickness of the watch. As for the rubber band, it is of exceptional quality, which adds value to the replica watch. Typically, high-quality rubber bands are expensive, but this one does not have any unpleasant odor and feels soft yet durable.

Which factory produces the best replica of the Datejust II watch? I have written numerous articles comparing the Datejust replicas made by Clean factory and VS factory, so it is understandable why this question is frequently asked. With so many watch factories producing replicas of the same watches, it can be confusing to determine the best option among them. Additionally, I have a question regarding the pricing of Clean factory’s Datejust II watches compared to those of VS factory. Despite not utilizing the 72-hour power reserve movement found in VSF Datejust replicas, Clean factory still sells their watches at similar high prices as VS.Today I would like to introduce another stunning timepiece from VS factory—a carbon Rolex Submariner.

The latest addition to VS factory’s collection is the striking DiW Submariner Parakeet. VS has recently witnessed a surge in popularity for its replica Rolex watches, surpassing that of its Panerai line. The DiW Submariner Parakeet boasts a unique design and appearance, sporting a fully matte-finished case and bracelet, complemented by a carbon fiber bezel and dial. These features are the watch’s biggest selling points, and give it a distinctive look. While the clone 3135 movement used in the watch is no longer a unique advantage, given its widespread use by various watch factories, the 3235 movement utilized in the 41mm Submariner is indeed a significant asset for VS.

I appreciate the matte finish as well. The watch features a 40.5mm diameter case with a thickness of 13mm, both crafted from genuine 904L stainless steel material. The black bezel and dial are made from real carbon fiber, marking the first time I’ve seen a Submariner with a carbon dial. The carbon texture presents a unique appearance, distinct from that of ZF Richard Mille. VS claims that the case profile is accurately replicated and interchangeable with genuine watch parts. While it’s been noted that many international watch brands utilize parts manufactured in China, they typically enforce stricter quality control measures compared to replica watches.

The Submariner has been one of the most widely discussed and improved replica watches in the past, but it seems that factories have stopped improving this model. While this may suggest that the Submariner is deemed perfect, I believe there are still some notable flaws in the watch. Four specific areas of concern include the shape and placement of the bezel pearl, the material used within the bezel markers, the axis of hand-set, and the quality of luminescence on the dial. For instance, the bezel pearl’s shape and position can be inconsistent across different replicas, and the material used in the bezel markers can vary in quality, affecting how well they function. Additionally, the axis of hand-set can sometimes be misaligned, leading to inaccurate timekeeping. Lastly, the quality of luminescence on the dial may not last as long in darkness as genuine Rolex watches. These issues seem to persist despite previous attempts at improvement, suggesting that they may continue to be a challenge for replica watch factories.